Alloy 8011 H14 / H16 Aluminum Sheets 0.24mm For Piler Proof Caps

Alloy: 8011

Temper: H14, H16

Thickness:0.18-0.24mm

Width: 60-800m

Length: 600-900mm

Chemical Composition:

Si:0.50-0.90%Max

Fe:0.60-1.0%Max

Cu:0.10%Max

Mn:0.20%Max

Mg:0.05%Max

Cr:0.05%Max

Ni:- Zn:0.10%

Ti:0.08%Max

Remains: Al

Tensile Strength: 125-165Mpa

Elongation:2%Min

Earing:2%Max

Surface Quality: been free from Oil Stain, Dent,Inclusion, Scratches,Stain, Oxide Dicoloration, Breaks,

Corrosion,roll marks, dirt streaks and other defect which will interfere with use.

Application: PP Caps, Vial Seals, Plain Tear Off Seal, Flip Off Seal, etc.

Certificate: ISO:9001:2000 FORM A,E or CO , Quality Certificate From Mill

Packing: Strong wooden cases or pallet, and about 19 ~ 20 tons in one 20' container

Company Brief Introduction:

Maxl is the professional manufacturer of aluminium sheets, including the aluminium sheets, aluminium coils, embossed sheets, aluminium strips, aluminium foils, mirror finished aluminium sheets and coils, etc. ISO9001 is certificated.

We strived to obtain more international markets and our products are sold worldwide, such as South America, Europe, Southeast Asia, and the Middle East, etc. The share of foreign trade grows rapidly.

Choose MAXL, you are not only choosing the good quality products but also the professional service.

Local agents without language problem and time difference is ready to serve you at any time.

MAXL INTERNATIONAL GROUP CO.LTD is a group company specialized in producing aluminum products.

The head office is located in Liaocheng city, Shangdong Province, China. Group has many Owned enterprises and joint venture enterprises including aluminum profile, aluminum sheet, aluminum composite panel, and aluminum bicycle rim.

Group has the capital of sales 3 billon dollars, annual sales 6 billon dollars, within aluminum profile sales 80,000 tons , aluminum sheet sales 120,000 tons.

The maximum profile extrusion machine is 4500tons ,42 sets extrusion machines as total, in addition, adpoted anodizing, coat equipment and water treatment equipment which is imported from Korea, UK EUROTEC, France SAMES, Japan .

ISO9001, ISO14001 and OHSAS18001 certificates are prooved.

Any request will be replied within 24 hours, Local office in Mexico, Columbia and Canada, no language and communication problem, no time difference.

After the continous hard working, MAXL has the market share over 30% in Columbia.

Have you met the problems with your supplier below?

• No suitable mould  
• The quantity is too less to produce  
• High rate in surface scratching
• Long production time  
• Damaged in shipping  
• Language problem
• Low efficiency because of time difference

Try MAXL, the professional manufacturer of aluminium profiles for South American market, ready to serve you at any time.